Alert Tone vs Evacuation Tone: What Australia’s Two Fire Alarm Signals Mean
Many Australian buildings use two different fire alarm signals, and knowing which is which can save critical seconds. The alert signal, often a slower, intermittent tone, means stop, pay attention and prepare to leave. The evacuation signal, a more urgent and distinctive tone, means leave the building now by the nearest safe exit. The two work as a staged sequence, giving people time to get ready before a full evacuation is called.
The alert signal: stand by and prepare
The alert signal is the first stage. It tells occupants that something has been detected and that they should stop what they are doing, stay calm and get ready to move. It is not a cue to ignore the alarm or to wait and see. Use the time to shut down anything unsafe, collect essentials such as your keys and phone, and listen for instructions from wardens or the building’s EWIS.
The evacuation signal: leave now
The evacuation signal is the second stage, and the one that matters most. In Australia it follows a standardised, internationally recognised pattern, often heard as a rising whoop or a rapid, repeated tone, and it means evacuate immediately. Walk, do not run, to the nearest safe exit, do not use the lifts, and move to your designated assembly area. If an evacuation signal ever sounds without an alert first, still treat it as a real evacuation and leave.
Why buildings use two signals
A two-stage system prevents two opposite problems: people leaving too slowly, and everyone flooding the stairs at once. The alert stage gives occupants and wardens a head start to prepare and, in larger buildings, lets the evacuation be staged floor by floor. Not every building has both signals. Smaller sites may use a single evacuation tone, in which case any alarm means leave straight away.
What to do when you hear each one
- Alert signal (stand by): stop, stay calm, prepare to leave, and listen for instructions. Do not ignore it.
- Evacuation signal (leave now): leave immediately by the nearest safe exit, do not use the lifts, and go to your assembly area.
Knowing the difference is a training issue
Occupants freeze when they are not sure what a sound means, and that hesitation, rather than the fire itself, is often what slows an evacuation. Making sure staff can recognise both signals, and know the one action each calls for, is a core part of fire warden training and your emergency response procedures. A thirty-second explanation during induction can shave minutes off a real evacuation.
First 5 Minutes helps Australian facilities train their people to recognise the alarm and act without hesitation. Explore our emergency preparedness training and AS 3745 Compliance Essentials, or get in touch to talk through your site.
Frequently asked questions
What is the difference between the alert tone and the evacuation tone?
The alert tone means stand by and prepare to leave, while the evacuation tone means leave the building immediately by the nearest safe exit. The alert stage gives people time to get ready before a full evacuation is called.
What does the evacuation tone sound like in Australia?
It follows a standardised, internationally recognised signal pattern and is often described as a rising whoop or a rapid, repeated tone. Whatever the exact sound in your building, it always means evacuate now.
What should I do when I hear the alert tone?
Stop, stay calm and prepare to leave. Shut down anything unsafe, collect your essentials, and listen for instructions from wardens or the building’s warning system. Do not ignore it or wait to see what happens.
Does every building have two fire alarm signals?
No. Larger buildings often use a two-stage alert-then-evacuate system, while smaller sites may have a single evacuation tone. If your building has only one signal, treat any alarm as a direct instruction to evacuate.